Setting Items for Copying

You can change the copy settings such as the page position, color mode, and intensity.

Press the OK button and select Copy settings.

Use the button to set the number of copies, paper source, color mode, then press the OK button.

Use the button to select Others when adjusting other settings, then press the OK button.

Note

• The setting currently specified appears in the selected state.

• Some settings cannot be specified in combination with the setting of other setting items or the copy menu.

• The settings of the Intensity: Auto and print quality are retained even if the printer is turned off.

• Number of copies

  Specify the number of copies.

  Ex:

  

• Paper source

  Select a paper source (rear tray/cassette) where paper is loaded.

  Ex:

  

• Color mode

  Select the color mode for copying (color copy/black & white copy).

• Others

  • Two-Sided Copying

    Select whether to perform duplex copying.

    • Two-Sided Copying

    Note

    • This item appears when A4 or Letter is selected.

  • Layout

    Select whether to copy two pages onto a single page.

    • Copying Two Pages onto Single Page

    Note

    • This item appears when A4 or Letter is selected.

• Copy intensity

  Change the intensity (brightness).

  Note

  • If you select Intensity: Auto, load the original on the platen.

• Enlarge/Reduce

  Select the reduction/enlargement method.

  • Reducing/Enlarging Copies

• Print quality

  Select the print quality according to the original.

  Note

  • The Quality: Draft can be set when the paper type is normal paper.